Scrigno Openbox Double Pocket Door Kit

The first open-box pocket door system by Scrigno: durable, easy to install and accessorise. With a design, considering the minutest detail, it is easy to transport and install because it is lightweight, but at the same time very solid and robust thanks to its pre-drilled reinforcements. Thanks to the locking spring, designed and patented by Scrigno, its double-level guide can be inserted simply and safely, allowing the addition of accessories even in later stages.

• This double door kit is built from taking 2 x single door kits, a joining kit and spacer bar - simply choose your options below.
• Effortless operation. The force required to get the door moving is less than 2kg thanks to the Scrigno’s patented hanger which boasts 4 bearings each with 7 smooth operating balls.
• Guaranteed for 20 years, rigidity and robustness is baked in. The hanger is rated to 100,000+ cycles and boasts an impressive ability to hold 20% more weight than the main competitors (Max 120 kg per door).
• Patented double-level track system which allows accessories to be inserted and regulated even after installation without removing the track.
• Lightweight and manageable. The Open box system is 50% lighter than the pre-assembled closed-box system.
• Finishing jambs are required to complete installation. These are stocked in either White melamine or Softwood finishes.
• Suitable for use with the majority of our standard & glazed 35mm doors*, even those with raised mouldings (exclusions apply).
• 40mm & 44mm doors can be used, but must be flush in design with no protruding mouldings or glazing beads.
• Final finished wall of 125mm achieved when installed with 12.5mm plasterboard.
• This double door kit is also available as a Single Pocket Door Kit.
• *The following door designs are unsuitable for use with our Pocket Door Systems: Kalmia, Chelsea & Allamanda